Method Sound

High Performance Car Audio Systems

1366 Logan Ave Ste A, Costa Mesa, CA 92626 949-842-0792
  • Home
  • Services
    • Car Audio
    • Custom Installation
    • Driver Safety
    • Laser and Radar Detectors
  • About Us
  • Location
  • Contact Us
  • Facebook
  • Instagram
You are here: Home / ARTICLES / Why Buy A Bigger Amplifier?

Why Buy A Bigger Amplifier?

AmplifierWhen an audio enthusiast goes shopping for an amplifier, the question of “how much power do I need?” comes up almost every time. There are a few factors to take into consideration when answering this question. This article looks at those factors and provides some technical background to help support your decision.

Why Do We Need Power?

AmplifierQuite simply, when you send more power to a speaker, it moves farther and produces more output. Two limiting factors within the speaker itself control how much power it can handle. At higher frequencies, the limit is heat. Speakers are notoriously inefficient. The best convert about 2% of the energy sent to them into sound and the rest is converted to heat. When you send 60 watts of power to a speaker, most of that energy heats up the voice coil and the components around it. Eventually, those components will reach a temperature where they will fail. The speaker will usually stop working at this point, or shortly after.

The second limiting factor is how far the speaker can move. Inexpensive midrange speakers may be able to move back and forth about half an inch without creating massive distortion. Higher-end speakers have as much as twice as much cone excursion capability. (Speakers don’t sound the same at high volumes as they do at low. Audition your speakers at the volume you will be using them.)

Power vs. Output

Power works like this: When you double the power going to a speaker, the output increases by 3 dB. That is not a large amount. In fact, it is the smallest change in amplitude that is perceivable across the audible frequency range. (1 dB is the smallest perceivable change in amplitude where our hearing is most sensitive – 1 to 2 kHz).

Perceived volume is a different beast. An increase of 10 times the power sent to a speaker produces a doubling of perceived volume.

Speaker Efficiency

Another consideration in choosing an amplifier is the efficiency of your speakers. An inexpensive conventional midrange speaker may produce an average output of 91 dB when measured 1 meter away from the speaker cone and when driven with 1 watt of power. A high-quality speaker will likely be less efficient, but capable of playing over a wide range of frequencies. A measurement of 85 dB efficiency at the same distance and power level is not uncommon.

How Loud Do We Need it?

AmplifierA typical RMS sound pressure level for an orchestra, when you’re seated three or four rows back from the musicians, is around 100 dB. If we use our analogy of the 85 dB efficient speaker, we need 31.6 watts to get that speaker to play 100 dB. The problem is that this is the average power, not the peak power. Perhaps the performance crests at 110 dB? In that case, we need a peak power level of 316 watts. Just keep in mind that the speaker components are likely to melt if you keep this effort up for any significant amount of time.

We don’t suggest buying any speaker based on its efficiency. Criteria like linearity, lack of distortion, application limitations and frequency range are far more important. If you need it loud, buy more speakers, or larger speakers.

Distortion Happens

What happens if we run out of power in an amplifier? We get distortion. This distortion creates all sorts of high-frequency harmonic content. That increased high-frequency energy is what causes tweeters to fail. We need to choose an amplifier that will allow our speakers to play loudly enough without running out of power.

You are better off buying a 100 watt per channel amplifier and only using 50 watts than you are buying a 50 watt amplifier and occasionally causing it to distort. Remember, those 50 extra watts only result in an increase in output of 3 dB – assuming the speaker can handle it.

It Takes Power to Make Power

AmplifierA consideration that many people overlook is the ability to supply an amplifier with the power it needs to produce the power you want. Modern vehicles have electrical systems with reduced power production capabilities. Smaller alternators, smaller batteries and smaller wiring save weight. Reduced weight transforms into better fuel economy for the vehicle.

As a general rule of thumb for power consumption calculations, you can assume that every 100 watts of power from an amplifier will require about 10 amps of current from your electrical system. Yes, some amplifiers are more efficient than others, but this serves as a good, quick guideline.

If you want to purchase a 650 watt amplifier to power your subwoofer, then your electrical system (battery and alternator) has to be able to provide it with about 65 amps of current. This power requirement is on top of what is required to run the vehicle. The computers, lights, ignition system, radio and heater all consume power as well. On a modern compact car, it would be no surprise if you only had 30 to 40 amps of power left over for an amplifier.

You can get away with a big amplifier – but you can’t play it indefinitely, even with the vehicle running. Once you have exceeded the power delivery capabilities of the amplifier, the battery will start to supply current. You can kill a car battery, even with the vehicle running. Once you shut the car off, you may not have enough energy in the battery to restart it.

Blowing up Amplifiers

AmplifierAmplifiers do not like to be starved for power. When you run out of power to drive your amplifier, in most cases, the amplifier rail voltage starts to drop. Power starvation causes the maximum undistorted power production of the amplifier to decrease. We are back to the same scenario: Distortion causes harmonics, and harmonics can damage fragile speakers.

If you have had an amplifier fail, and the failure was because the power supply section of the amp self-destructed, chances are you were not able to feed the amp properly.

How Much Amplifier Power Do You Need?

The solution: Buy as much as power as you can afford. Buy the biggest that will physically fit in your application. Get the highest-performance amplifier you can. Make sure your installer uses properly sized wiring to install the amplifier. Upgrade your car battery to a high-performance, high-capacity unit if you need more reserve power.

For more information, visit your local mobile electronics specialist retailer. Be honest about your needs and expectations for your audio system. They will be able to suggest a solution that sounds fantastic and will offer years of reliable performance.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Share this:

  • Click to email this to a friend (Opens in new window)
  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)

Related

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY

About BestCarAudio.com

BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

Recent Articles

Female hands on steering wheel

Steering Wheel Audio Control Integration

May 1, 2022 

When you go shopping for a new radio for your car, one of the many questions the product specialist should ask you is whether your existing radio has steering wheel-mounted audio … [Read More...]

Preamp Voltage

Does Preamp Voltage Matter?

April 3, 2022 

For almost as long as there have been car audio enthusiasts, they have been adding amplifiers to their vehicles to increase the power available to drive their speakers. More power … [Read More...]

Rear Speakers

Rear Speakers – A Benefit or a Bad Habit?

March 6, 2022 

For decades, automobile manufacturers have installed relatively large rear speakers in their vehicles. The stereotype of a set of 6x9 speakers sitting on the parcel shelf of a … [Read More...]

Bluetooth

What is Bluetooth?

February 6, 2022 

If you have been around the mobile electronics industry for any amount of time, you will know that certain terms are often used incorrectly. One term that has been over-abused … [Read More...]

Product Spotlight bit One HD Virtuoso Version 3.0 Software

Product Spotlight: Audison Bit One HD Virtuoso

January 18, 2022 

Long considered one of the forerunners in digital signal processing in the car audio industry, Audison continues their performance and technological evolution with the introduction … [Read More...]

Subscribe!

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Join 10 other subscribers

Testimonials

My audio system sounds far better than it ever did, and this was without any hardware changes!

I instantly knew that Michael is now joining my short list of service providers whom I trust. I do not often write reviews or give much feedback, except when it is very well deserved – negative or positive. I am happy to act as a referral for Michael, and if any prospective customer is reading this and wants to talk to me before spending any money with Michael I will take time out of my day to help out.

Ben Gillenwater, Laguna Hills

Method Sound
5
2016-09-27T02:12:51-04:00

Ben Gillenwater, Laguna Hills

I instantly knew that Michael is now joining my short list of service providers whom I trust. I do not often write reviews or give much feedback, except when it is very well deserved – negative or positive. I am happy to act as a referral for Michael, and if any prospective customer is reading this and wants to talk to me before spending any money with Michael I will take time out of my day to help out.
https://www.methodsound.com/testimonials/my-audio-system-sounds-far-better-than-it-ever-did-and-this-was-without-any-hardware-changes/

Michael has done an outstanding job on all of our family vehicles.

He’s always available when we’ve needed him and goes above and beyond without being asked. I wouldn’t hesitate to refer him to any of my friends, family & associates.

Tony Alessandra, Mission Viejo

Method Sound
5
2016-09-27T00:49:55-04:00

Tony Alessandra, Mission Viejo

He’s always available when we’ve needed him and goes above and beyond without being asked. I wouldn’t hesitate to refer him to any of my friends, family & associates.
https://www.methodsound.com/testimonials/michael-has-done-an-outstanding-job-on-all-of-our-family-vehicles/

Michael Thompson at Method Sound was great to work with!

He was able to seamlessly integrate my new equipment into the car with the same quality and care that was taken at the factory in Germany. His attention to detail and extensive technical knowledge make him the best choice to work on your high end/exotic car.

Karl, San Diego

Method Sound
5
2016-09-27T00:49:20-04:00

Karl, San Diego

He was able to seamlessly integrate my new equipment into the car with the same quality and care that was taken at the factory in Germany. His attention to detail and extensive technical knowledge make him the best choice to work on your high end/exotic car.
https://www.methodsound.com/testimonials/michael-thompson-at-method-sound-was-great-to-work-with/
5
3
Method Sound

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Location


Get Directions to Method Sound

Address

Method Sound
1366 Logan Ave Ste A,
Costa Mesa, CA 92626
Phone: 949-842-0792

Connect With Us

  • Facebook
  • Instagram

Services

  • Car Audio
  • Custom Installation
  • Driver Safety
  • Laser and Radar Detectors

Business Hours

Appointments available Monday-Saturday. Please call to schedule your consultation .

Copyright © 2022 Method Sound · Privacy Policy · Website by 1sixty8 media, inc. · Log in

 

Loading Comments...
 

    loading Cancel
    Post was not sent - check your email addresses!
    Email check failed, please try again
    Sorry, your blog cannot share posts by email.